Prekast Perdeler

SUMO^® Duvar Pabucu

SUMO^® Duvar Pabuçları, prekast beton duvarlar ve temeller, ya da prekast beton duvarların kendi arasında, uygun maliyetli germe bağlantıları oluşturmak için kullanılır. SUMO^® Duvar Pabuçları, HPM^® ve özel pullara sahip PPM^® Ankraj Bulonu tipleriyle kullanılır.

PVL^® Bağlantı Halkası

PVL^® Bağlantı Halkaları, prekast duvar panellerini birbirine veya başka bir kolona bağlamak için kullanılan tek sargılı halkalardır. PVL^® Bağlantı Halkaları, duvar montajını kolaylaştırır: Bandı çıkartıp halkayı işletme pozisyonunu alacak şekilde eğmeniz yeterlidir.

ARBOX^® Joint Reinforcement

ARBOX^® Joint Reinforcement is a ready-to-install system for creating stiff concrete casting joints of reinforced concrete elements. ARBOX^® can be attached to formwork without having to penetrate or make other adjustments to the formwork. ARBOX^® Joint Reinforcement is suitable for creating a wide range of connections, such as wall-to-wall, column-to-wall, and wall-to-slab. ARBOX^® type A replaces TS Joint Reinforcement type TSA as of May 2018.

TS Joint Reinforcement

TS Joint Reinforcement is a ready-to-install rebar starter box for concrete casting joints. There are two types, TSA and TSK, that have loops or straight rebars as starters.

PD Diagonal Tie

PD Diagonal Ties are single-lattice girders used for connecting the inner and outer concrete layers of a sandwich wall element together. The lattice girder consists of stainless diagonals and flanges made of either stainless or reinforcing steel.

PPA Beam Tie

PPA Beam Tie is a single connector used for connecting the inner and outer concrete layer of sandwich wall elements together above the opening lintels or low socle elements. The PPA Beam Tie is used when the height of concrete layers does not allow the use of diagonal ties.

Connector Pins

PPI and PDQ Connector Pins are used to connect the concrete layers of sandwich walls together. Connector pins are used together with diagonal ties. The product range allows to use connector pins with various insulation thicknesses.

WELDA^® Anchor Plate

WELDA^® Anchor Plates are CE marked all-rounders in transferring loads to concrete from other structures via welded connection. The stud-headed anchors welded onto the plate are optimized for easy installation into the reinforcement. Anchors are available in three different lengths to avoid collision with reinforcement or need of supplementary reinforcement.

WELDA^® Strong Anchor Plate

CE marked WELDA^® Strong Anchor Plates are designed to transfer heavy loads in load bearing structures of concrete frame. The headed rebar anchors of WELDA^® Strong Anchor Plates are optimized for easy installation even into dense reinforcement.

Long WELDA^® Anchor Plate

CE marked long WELDA^® Anchor Plates can be used for welding larger or multiple profiles to one long plate. Long anchor plates are suitable especially for heavy industrial constructions and machine foundations, but they can be used also in other structures such as beams and columns.

Special Anchor Plates

Special Anchor Plates are made according to project specific needs, and always tailor-made from design to manufacturing.

TR Fastening Items

TR Fastening items come in various different types and are designed to create steel contact surfaces for various precast concrete elements.

KKT Angle Bar

KKT Angle Bars are designed for long fixing or several fixings on concrete edges. They are especially suited for heavy industrial constructions. KKT Angle bars are available in lengths up to 6 m.

KL Anchor Plate

KL Anchor Plate is a cost-efficient solution for transferring moderate and medium loads to concrete. It is suitable especially when small edge distances are required e.g. in column heads and wall panel sides.

Duvar Pabucu Ankraj Bulonları

Kendilerine özel AL pulları olan duvar pabucu ankraj bulonları, SUMO^® Duvar Pabuçlarıyla birlikte kullanılır. Bu bulonlar, onaylı HPM^® ve PPM^® Ankraj Bulonları üzerine yerleştirilir. Ürün yelpazesi, orta ve ağır yükleme koşulları için uygundur.

KS Corner Protector

KS Corner Protectors are recommended to keep the corners of columns and walls in good shape during their entire lifetime. They do not transfer any constructional loads. The advantages of KS Corner Protectors are at their best in industrial construction and warehouses with forklift traffic.

SKT Angle Bar

SKT Angle Bars are designed to be used as protecting profile for the inner corner of the concrete constructions. They can transfer moderate loads to the concrete.

UKT Angle Bar

UKT Angle Bars are designed to be used in the outer corner of the concrete construction e.g. corners of stairs and expansion joints. They can transfer moderate loads to the concrete.

MODIX^® Rebar Coupler

MODIX^® Rebar Coupler is designed to be the safest and most flexible rebar splicing system. Thanks to the unique visual inspection system, it is safe and easy to verify that all connections are closed. The system guarantees high flexibility and quality.

SUMO® Duvar Pabucu

PVL® Bağlantı Halkası

ARBOX® Joint Reinforcement